Rixson 195 Jamb Attached Offset Bottom Pivot -LTP

Rixson Model 195 Bottom Pivot -LTP

3/4" Offset Jamb Attached Bottom Pivot -Less Top Pivot

Application
Single Acting
Exterior or Interior Doors
Weight to 450 lbs.*
Door Width up to 4'-0"
ANSI C07131

Handing
Specify LH or RH

File Downloads

Template

Installation

Cut Sheet

Features
Bottom pivot for use with Rixson Model 180 and 680 Top Pivot
Includes Side Jamb Mount Spindle Stud Base Plate and Bottom Arm Pack

• Bottom pivot mortised into side jamb
• Pivot set can be vertically adjusted up to 3/16" after installation
• Not available for fire-rated doors
• 3/4" offset (measured from center-line of pivot to face of door)
• Door edges must be beveled 1/8" in 2"
• Weight of door is borne by floor portion
• Doors will swing 180 degrees, trim permitting
• Furnished with wood and machine screws
• Doors up to 90" tall normally require the use of one intermediate pivot. Every additional 30" of door height warrants another intermediate pivot.
• Model M19 Intermediate Pivot(s) sold separately

Notes
*Door size and weight guidelines are determined by using the appropriate number of intermediate pivots.

Finish
Specify 605, 613, 625 or 626

Bright Brass	Dark Bronze	Bright Chrome	Satin Chrome
605 (US3)	613 (US10B)	625 (US26)	626 (US26D)