Rixson H28 Center Hung Floor Closer Package

Rixson Model H28 Door Closer

Heavy-Duty Center Hung Concealed Floor Closer - Complete Package

Application
Single Acting
Exterior or Interior Doors
Extra Heavy / High Traffic Doors
Weight to 1,000 lbs.
Specified Door Sizes up to 4'-0" x 8'-6"*
ANSI/C06061
*For doors taller than 8'-6" use top pivot Model H345 in lieu of supplied Model H340

Hold Open
Specify Non Hold Open (NHO) or Selective Hold Open (SHO)

Positive Dead Stop
Specify 90 or 105 Degree

Handing
Specify LH or RH

File Downloads

Template

Installation

Cut Sheet

Features
Complete package includes Rixson Model H28 Closer Body, Cement Case, End Load Bottom Arm Package, Floor Plate and Model H340 Top Pivot

• For high traffic or extra heavy doors (2" min. thickness)
• Additional thrust bearing for greater load capacity
• Built-in positive dead stop (90 or 105 degrees) prevents door from swinging beyond the desired opening degree
• Available non hold open (NHO) or selective hold open (SHO) at same degree as dead stop
• Separate and independent valves for closing speed, latch speed and back-check
• Steel cement case
• Furnished with wood and machine screws
• Not allowed for fire rated doors
• Applied stop required if not supplied on frame, sold separately (see Rixson Model 60131 or similar)

Listed specifications for models stocked and available for shipment from Epivots online store. Please call or email for Factory Order PH, DA, SC, CWF, extended spindles, or other special order configuration requirements.

Technical Notes:
All Rixson single acting closers have a preloaded spindle that causes the arm (door) to come to rest beyond the zero degree position approximately 5-7 degrees. This is to ensure the latch engages in the strike and to help overcome negative building pressures. This requires all frames to have integral or applied stops.

Finish
Specify 605, 606, 612, 613, 625 or 626

Bright Brass	Satin Brass	Satin Bronze	Dark Bronze	Bright Chrome	Satin Chrome
605 (US3)	606 (US4)	612 (US10)	613 (US10B)	625 (US26)	626 (US26D)