FritsJurgens System M+ Center Hung Door Closer Package
Concealed In Door Center Hung Pivot Door Closer
with Damper, Speed and Latch Controls
System M+ with 70mm Minimum Inset Top Pivot
Configured with Rectangular Floor Plate
in Stainless Steel Finish
ST.M+.70.X.S.SS
Packaging
Delivered as a complete set with bottom pivot/closer, floor plate, top pivot, ceiling plate and fitting accessories.
Ordering Notes
Please download and confirm all specification prior to ordering; return restrictions apply to this item.
Application
Center Hung
Double or Single Acting
Entry or Interior Doors
For doors up to 500KG (1,100 lbs.) based on weight class, width and weight of door.
40MM Minimum Door Thickness (1-9/16") for Weight Class A-E
50MM Minimum Door Thickness (2") for Weight Class F and G
70MM Minimum Pivot Inset from Door Edge (2-3/4")
Hold Open
Hold Open at 90 degrees, not available as NHO
Spring Size
Specify spring/weight class: A, B, C, D, E (M32+) or F and G (M42+)
(based on door width, weight and pivot inset placement)
Handing
Non-handed
File DownloadsFeatures
The pivot-door hinges by FritsJurgens are almost entirely invisible, this is because the hinge is entirely integrated into the top and bottom side of the door. This makes them perfectly suitable for both modern and classical applications.
NO STRUCTURAL ELEMENTS
System M+ Series is fully-mortised into the top and bottom of the door: no structural elements in floor and ceiling.
LOAD-BEARING CAPACITY: UP TO 500 KG**
System M+ Series can support large and heavy doors up to max 500 kg thanks to high performance and corrosion resistant materials like duplex stainless steel and anodized aluminum. **See specification sheet for proper sizing and application.
MINIMUM DOOR THICKNESS: 40MM/50MM
The thickness of System M+ is only 32 mm (class A-E) /42 mm (class F and G). (
MAINTENANCE - FREE
Built from materials of the highest quality, the system is maintenance-free.
FOR NEW AND RETROFIT SITUATIONS
The floorplate fasteners only need to mortise 8mm in the floor, which means System M can also be combined with underfloor heating.
EASILY-ADJUSTABLE
The innovative design of our hinge systems means the gap between the door and jamb can be adjusted with the door fully-loaded. The closing speed of the door can be adjusted.
SUITABLE FOR ALL TYPES OF DOORS
Ideal for large, heavy and tall timber, steel, framed glass and massive clad doors. Perfect for interior and exterior doors, in both residential and commercial environments.